Centre Line Method to Estimate the Quantities of Building

 


The centre line method helps to estimate the building quantities more accurately, thus the right requirement for the building materials and associated costs has been obtained. In the centre line method, a centre line has been established, and the distance has been measured from it, which helps to obtain the actual quantities of the building components.

In the first step of the centre line method, the total centre line length of the walls has been estimated. In the next step, the depth and breadth of the building components have been multiplied by the total length of the centre line, thus obtaining the total quantity of the building components. The centre line length for the different sections of the building’s walls has been estimated separately.

In the case of the verandah walls or partition walls that joined to the main walls, the length of the centre line has been reduced by half of the breadth layer, which has been joined with the verandah walls or partition walls. The centre line method helps to complete the overall building quantity estimation more quickly. The centre line method can be used to estimate the material quantities of the rectangular, circular, hexagonal, octagonal or other types of building structures.

Procedure for Estimating the Centre Line Method

There are several steps that need to be followed for conducting the centre line method. These steps are as follows:

Determining the building layout

In the first step, the estimators should have a clear understanding of the layout of the building structure. In this regard, the estimators should have the knowledge about the beams, walls, columns and other building components that are going to be measured under the centre line method.

Identifying the centre line

After collecting the information about the building layout, the estimator should have to determine the centre line for each of the building components. In this context, the centre line for each building component should be darwin more accurately throughout the estimation procedure.

Measuring the length and areas

In the next step, the length of the beams, walls, columns and other building components has been measured along with the centre line. In the case of the columns and beams of the building structure, the length has been measured along the centre line and the cross-sectional dimensions. To obtain the areas of the building components, the estimator has to measure the width to the centre line, and it has to be multiplied by the length.

Read more

Comments

Post a Comment

Popular posts from this blog

Bridge Types: An Explanatory Guide with Different Types

Image
  Developing bridges that are unique and safe for people begins with an understanding of bridges as a construction worker and civil engineer. For a bridge to carry a lot of vehicles year after year & decade after decade, you must calculate its daily vehicle load. Arch Bridges A classic bridge type, arch bridges are the oldest bridges after girder bridges in terms of architecture. Stone is well suited to arches as opposed to simple girder bridges. A typical arch does not require piers in the center, making it an attractive choice for crossing valleys and rivers. There are many types of bridges, but arch bridges can be one of the most beautiful. Arches are built with curved structures that are highly resistant to bending. As opposed to girder and truss bridges, arch bridges are fixed horizontally on both ends, so they can only be used on solid ground. The arch bearings experience horizontal forces when a load is placed on the bridge. There are some cases in which the roadway pass...
Read more

Smart Building ? A New Interpretation of the Modern Construction

Image
  Technologies change the way the construction has been done. The scenario welcomes new things and development ideas to ensure a faster, quality work. These days, the smart building occupies a significant position in the interest of people. Since the concept is innovative, people are showing a great level of interest to know what the smart building is. Reasons behind the success of the Smart Building rooted deep in an evolution of the construction. There are many things attached to the concept that are well-connected to technology and creativity. The content discloses everything that makes the Smart Building a smarter choice for the today?s generation. The Approach to the Cognitive Building: Construction technologies have crossed miles over decades. The new approach to the cognitive building is the result of their evolution. More data are generated today which is used in developing the construction plan. Cognitive buildings generally use the artificial intelligence to understand an...
Read more

Triangulation Method of Surveying in Civil Engineering

Image
  Triangulation is a surveying procedure that helps to estimate the angles in the triangle, which has been formed by the three survey control points. A network of triangles has been traced and measured by the triangulation surveying method, which helps to determine the distance and the points’ positions across the area. In the case of hilly terrain, the conduct of the triangulation surveying procedure is advantageous. In the triangulation surveying process, the entire area has been covered along with a network of triangles, and the surveying process has been started with a precisely measured baseline. The triangulation surveying procedure extends and interconnects the triangles, which helps to form a comprehensive framework throughout the entire surveyed area. Reasons behind conducting the Triangulation Survey Procedure The triangulation survey procedure helps to establish an accurate control network, which acts as the backbone of engineering projects. The main reasons behind the c...
Read more